## Getting Better Mapping Results Starts Before Takeoff
Accurate orthomosaics and 3D models begin with proper flight planning. Altitude, image overlap, camera angle, and flight speed can significantly affect reconstruction quality.
### 1. Image Overlap
Common starting points for mapping missions:
- Front overlap: 80–85%
- Side overlap: 70–80%
- Complex terrain: 85%/80% or higher when necessary
Higher overlap can improve reconstruction but increases image counts and processing time.
### 2. Flight Altitude
- 150–200 ft AGL: Higher detail
- 200–300 ft AGL: Balance of detail and coverage
- 300–400 ft AGL: Larger coverage areas
Choose altitude based on required GSD, obstacles, and airspace restrictions.
### 3. Camera Angles
- Nadir (-90°): Orthomosaics and terrain mapping
- Oblique: Building facades and detailed 3D reconstruction
- Combined missions: Improved coverage of complex structures
### 4. Consistent Mapping Workflows
For recurring construction projects, maintain consistent altitude, overlap, camera settings, and flight boundaries. Use RTK or GCPs when positional accuracy matters.
### Let's Compare Settings!
What's your preferred configuration?
Drone:
Altitude:
Front/side overlap:
Camera angle:
RTK/GCPs:
Planning software:
What settings consistently give you the best mapping results?
— The DroneFlow.Ai Team